Voltage controlled relays

Discuss your project Ideas, or help others with their projects here.
Posts: 36
Joined: Thu Feb 25, 2016 4:45 pm

Re: Voltage controlled relays

Postby mongo » Fri Feb 02, 2018 11:57 pm

Well... I can see why some have not been around much... I for one have been a little scarce myself. Mostly because I have so many irons in the fire, it's hard to get around to the ones that I put my free time into - when I don't seem to have any.

I have been completely off-grid here at my cabin for about 6 months now. Added a couple of batteries to my system so it really has not been getting to the charge voltage that triggers the system to shut down. The wind turbines are doing their job and the batteries (6 all together now) are enough of a load that I have only had to put the brakes on just a few times. The system shuts down at 14.8V and I generally don't let the voltage go over 13.9V or under 10.8V.

I will still work on the relay circuit as I get the time, but since it has been doing fine without, the priority has gone down.

User avatar
Posts: 136
Joined: Sun Jan 17, 2016 3:15 pm

Re: Voltage controlled relays

Postby Rick_S » Fri Feb 09, 2018 3:46 am

I don’t know how you do that, I’d go through withdrawl :D

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 1 guest